

|
FEATURES: |
|
|
◆ Professional Picture Quality |
◆ Consumer Agile Double Side Band Modulation |
|
◆ Full 90dBuv Output |
◆ Agile Channel Selection Via Front Panel Control and LED Display |
|
◆ Low Spurious Harmonic Output |
|
|
◆ Non-Volatile Memory Retains Channel Information During Power Outages |
◆ Comply to CCD Camera Metal Housing |
| SPECFICATIONS: PAL | |
|
RF |
GENERAL |
|
Frequency Range :UHF:CH21~CH69 CATV:CH57~CH106 |
Power Requirement : 12VDC/300mA |
|
Output Level : 90dBuv Min. |
Power Source : Power Adapter |
|
Aural/Visual Carrier Ratio : Preset 15±2 dB Below Visual |
Input Voltage : 110VAC~220VAC |
|
Frequency Stability : ±1KHz |
Dimension(WxHxD) : 75x90x25mm |
|
Spurious Output : -50dBc |
Weight : 0.03Kg |
|
Output Impedance : 75Ω |
Temperature Range : -20℃ to +50℃ |
|
Output Return Loss : 14 dB Min. |
|
|
VIDEO |
CONNECTORS: (Rear Panel) |
|
Input Level : 0.8Vp-p for 80%±10% Modulation |
Video Input : RCA Phonon, Female |
|
Input Level Adj : 0.4Vp-p ~ 0.8Vp-p |
Audio Input : RCA Phonon, Female |
|
Visual C/N : 55dB |
RF Output : “F” Type, Female |
|
Frequency Response : ±2.5dB(50Hz to 4.2MHZ) |
|
|
Hum and Noise : -55dB @87.5% Modulation |
CONTROLLERS:(Front Panel) |
|
Output Impedance : 75Ω |
Channel Lock : Tact Switch |
|
|
Channel Up/Down : Tact Switch |
|
AUDIO |
Video Level Adj : Variable |
|
Frequency Adj Range : 50Hz to 50KHz |
Audio Level Adj : Variable |
|
Frequency Response : ±2dB |
|
|
Input Impedance : 600Ω Unbalanced |
INDICATORS(Front Panel) |
|
(Specification subject to change without notice) |
Channel Display : Red LED |